Bandsaw Throat Plate Table Insert Measurements and Dimensions

Modified on 2016/12/29 19:02 by MarkCA1 Categorized as Bandsaws

@@Atlas 12" bandsaw: 2.000 x .125
Craftsman 12" bandsaw: 3.360 x .106 (from mid '70's)
Delta 14" bandsaw: 2.500 x .090
Delta 20" bandsaw: 3.000 x .090
Delta 18" scroll saw: 2.500 x .090
Delta Rockwell overarm pin router: 2.503 x .112
Duro overarm pin router: 2.25 x .125
Homecraft 10" bandsaw: 2.500 x .090
Oliver bandsaw and drill press: 2.990 max dia, 2.375 minor diam, .737 thick, .360 thick lip, center back bored to leave .25 thickness for 1.75” dia to allow tilt
Porter Cable scroll saw: 2.750 x .145
Powermatic 140 & 141 14" bandsaw: 2.25 x .125
Powermatic 81: see Bob's sketch
WT 14" & 16" wood/metal: 1.985 x .186
Yates American (Broadhead Garrett) 14" BS: 3.010" dia, 0.077" thick@@

Original topic started at [^http://owwm.org/viewtopic.php?f=1&t=177169]http://owwm.org/viewtopic.php?f=1&t=177169

Meta Keywords: band saw, Bandsaw, table insert, throat plate
Meta Description:
Change Comment:

	Welcome Guest, • Login
Wiki Home \| VintageMachinery.org Home \| OWWM.org Home \| Donate	Search the Wiki: »