Navigation¶

• Main Page
  

• Random Page
• Create a new Page
• All Pages
• Categories
  

• File Management
  

• Create Account
  

• Help Topics
  

Filter by Category

Rebuilding A Powermatic 45 Wood Lathe — 22.2%

[...] replaced the bearings and flat VS pulley drive belt. Replacing bearings or VS pulley belt, Powermatic 45 Warning: Don't remove the snap ring that is found on the right side of the VS pulley assembly. Removing this allows the spring to escape and complicates matters enormously. Treat the VS pulley as a subassembly and remove/reinstall it as a unit. Warning: [...]

Rebuilding A Jacobs Chuck — 11.1%

[...] much pressure and distort the body of the chuck. (Note: This may be in reference to Beautiful Iron's warning about not pressing the chuck onto the taper/arbor [...]

VintageMachinery.org Bug Reports and Improvement Requests — 11.1%

[...] 2025-05-16 - Allow all members, not just historians, to create Images entries 2025-10-06 1- 6:44:14,912 WARNING incorrectly declared encoding: document declared [...]

The Thresher’s (Steam Traction Engine) Guide, Volume 1, Chapter 10 — 11.1%

[...] duty to watch everything carefully and see that every part is in good adjustment. But right here a warning is necessary. It is not a wise thing to start [...]

Decals - Delta Milwaukee — 11.1%

[...] version) Submitted by Girino (Right click and select "save target as" to download High-res version. Warning: 7 MB!) Bandsaw Round submitted by NeilB [...]

Babbitt - Pouring Supplies — 11.1%

[...] A small propane camp stove works great but a electric hot plate or even the kitchen stove will do (Warning - do not try melting babbitt on the kitchen [...]

Edward Huber — 11.1%

[...] public loss and general sorrow. The whole community is inexpressibly shocked and grieved. The lack of warning and the untimeliness of it have intensified [...]

Delta 6x48 Sander Shafts — 11.1%

[...] 31-710 bearing removal Rockwell 6x48 sander Starting rebuild of 31-710 belt/disk, any hints? WARNING: Read this whole section before proceeding [...]