Page History: Another knife setting method

Compare Page Revisions

2 1 0 Current 2 1 0

« Older Revision - Back to Page History - Newer Revision »

Page Revision: 2011/12/18 21:19

This method of setting knives on a Yager and K2000 planer is about a simple as it gets.

Another knife setting method¶

Author unknown




To adjust knives, lightly tighten so blade holds but slips. Put 1/16” acrylic sheet on table & raise so that roller springs are compressed at least 1/8”. Run knife roller backwards by hand to push blades into position. Tighten.

TAKE NO MORE THAN 1/16” PER PASS.