Replacement Bearing List - Sears Craftsman/Companion/Dunlap/Fulton/Kenmore Machinery

Modified on 2022/06/22 16:05 by Bill Widmer Categorized as Bearings, Restoration Topics
''By: [http://vintagemachinery.org/members/detail.aspx?id=636|Brian Kachadurian]''
{rating}
==Introduction==
* This list contains bearing information for machinery sold by Sears.
* '''The list is generally sorted by the model number after the three digit source code.'''
* I will continue to update this list with actual data.
* At the end, there is a short list of ball bearing sizes, for reference.
* Oilite refers to (Chrysler developed) oil impregnated sintered bronze, usually SAE841.


{toc}

==Band Saw==
====Craftsman (10" Deluxe) 103.0101====
* Original bearings: (TBD)

====Craftsman/Dunlap (12") 103.0103==== 
* Original wheel bearings: Hoover 7720-10 with shield on one side (some machines equipped with SKF ball bearings)
* Central Specialty part number X-1704
* Accurate replacement: 6202-5/8, Qty=2-upper wheel, 2-lower shaft
* Guide thrust bearings: single ball 7/32" diameter, Qty=2

====Craftsman (12") 103.24250====
* Original wheel bearings: TBD
* Guide thrust bearings: single ball 7/32" diameter, Qty=2

====Craftsman (12") 103.24280====
* Original wheel bearings: (upper) 2x Norma XF-121-PP, (lower) Federal FS-1115

====Craftsman (12") 113.24330====
* Original wheel bearings: (upper) TBD, (lower) SKF 6203 VLG dual rubber seals
* Replacement wheel bearings: (upper) TBD, (lower) 6203-5/8" bore (Sears p/n STD315238)


==Drill Press==
====Craftsman 103.0303====
* Quill-6202-?? conflicting reports of 15mm and ⅝” bore (Qty-2), Spindle pulley-6204 (Qty-2)


====Craftsman 103.23100==== 
* Original thrust bearing: Central Specialty p/n-18221; Accurate replacement-(TBD)

====Craftsman 103.23130==== 
* Original bearings: quill-MRC 202 SF8 (Qty-2), spindle pulley-Norma 205-PP (Qty-2)
* Accurate replacement: (see below)


====Craftsman 103.23640==== 
* Original bearings: quill-Norma XF-121-PP (Qty-2), spindle pulley-various 6205 (Qty-2)
* Accurate replacement: quill-6202-5/8 bore, spindle pulley-6205

====Craftsman 103.2482x====
* Accurate replacement: quill-6202-5/8 bore (Qty-2), spindle pulley-6205 (Qty-2)

====Craftsman 15-inch & 15½-inch Central Specialty & Emerson built USA Bench & Floor Models (excluding Emerson built Commercial models)====
* Accurate replacement: quill-6202 with 5/8" bore double shield (Qty-2), pulley-6205 double shield (Qty-2)

====Craftsman 15½-inch Emerson built USA Commercial models====
* Accurate replacement: upper quill-6203 double shield, lower quill-5203 double row double shield, pulley-6205 double shield (Qty-2)

==Grinder/Polishing Head - Belt Driven==
====Craftsman (6") Cat# 2601====
* Original Bearings:  MRC 202-SFF (double shield)
* Accurate Replacement:  6202ZZ (double shield)

====Craftsman (Polishing Head) 113.6601====
* Original bearings: (TBD, possibly 1622)

====Craftsman (6") 103.6604 (early model)====
* Original Bearings:  unknown-no markings
* Accurate Replacement:  1622

====Craftsman (6") 113.6604 (later model)====
* Original Bearings:  NICE 7322-DC double shield
* Accurate Replacement:  1622

====Craftsman (6") 113.6605====
* Original bearings: (TBD, possibly 1622)

====Craftsman (8") 109.66110, 109.66130====
* Original Bearings:  SKF 6204 2Z (double shield), Hoover 77204 (double shield)
* Accurate Replacement:  6204 ZZ (double shield)

====Craftsman (8") 109.66120====
* Original Bearings: Oilite sleeve OD=1-5/16", ID=15/16", L=1-1/4" (note-this is a non-standard size)

====Craftsman (6") 103.6614====
* Original Bearings: Oilite sleeve (size TBD)

====Dunlap (Polishing Head) xxx.6643====
* Original Bearings: Oilite sleeve (size TBD)


====Craftsman (Polishing Head) 103.6647====
* Original Bearings: Oilite sleeve (size TBD)

====Craftsman (6") xxx.6649====
* Original Bearings: 6202ZZ


==Grinder - 6" Electric==
====Companion 115.5273====
* Original Bearings:  ND (USA) ENDEE 8502 (shield on ext inner race, open outer)
* Accurate Replacement:  87502

====Craftsman 115.7561====
* Accurate Replacement:  6202

====Craftsman 397.19391====
* Original Bearings:  NDH 7503 (double shield)
* Accurate Replacement:  6203 (double shield)

====Craftsman 115.19500====
* Packard part number: 954832

====Craftsman 397.19589====
* Original bearings: ND 77503; Delco part number: 3161173


==Grinder - 7" Electric==
====Craftsman 5120 (Cat# 2609)====
* Accurate replacement: 6204

====Craftsman 115.6965====
* Original Bearings: ND (USA) 8502 (shield on ext inner race, open outer)
* Accurate replacement: 87502

====Craftsman 115.7575====
* Original Bearings: ND (USA) 97503 (seal and retention shield)
* Accurate replacement: 6203

====Craftsman 397.1949====
* Original bearings: NSK (USA) 3803 (double shield)
* Accurate replacement: 6203 (double shield)

==Grinder - 8" Electric==
====Craftsman 397.19670====
* Original bearings: (TBD)

====Craftsman 257.192190====
* Original bearings: Nachi NB (Japan) 6203Z double shield
* Replacement bearings: 6203 double shield

==Jointer==
====Craftsman (4¼") 103.0502====
* Original Bearings: SKF 6202 single shield
* Central Specialty part number: X-1700

====Craftsman (4⅜") 103.23340, 103.21820, 103.20670, 103.20680====
* Original Bearings:  MRC-S5-SFF
* Accurate Replacement:  R8ZZ (shields) or use R8LL (seals)
* Central Specialty part number: 18231
* Sears replacement part number: STD315085


====Craftsman (6") 102.05600====
* Original bearing: SKF p/n I-70336
* Walker-Turner part number: 9P6B
* Accurate replacement part: 6202-5/8 

====Craftsman (6") 103.23900, 103.20660====
* Central Specialty part number: 18236
* Sears replacement part number: STD315228

====Craftsman (6") 103.23320{br}Craftsman (6⅛") 103.20620, 113.20621====
* Central Specialty part number: 18211
* Sears replacement part number: 508511 (shaft assembly with bearings)

====Craftsman (6⅛") 113.20650, 113.206801, 113.206933====
* Emerson part number: 3509
* Sears replacement part number: 3509
* Accurate replacement: 6202ZZ-5/8 (double shields) or 6202LL-5/8 (double seals)

==Lathe==
====Dunlap 534.0601 9x30 Belt Driven Woodworking Lathe====
* Original Thrust Bearing:  SKF 465233 (ID: 1-7/16", OD: 7/8", W: 13/32"); Atlas part number- L2-20
* Single ball for pulley index pin: 3/16" diameter; Atlas part number- 9-210

====Craftsman 101.06260 10x36 Belt Driven Woodworking Lathe====
* Original spindle bearings (Qty-2): Atlas part number- 60-31; SKF 6205-Z EC L-05-Z (shield to outside of headstock, open inward); Accurate replacement-6205LL (seals) or 6205ZZ (shields)
* Single ball for pulley index pin: 3/16" diameter; Atlas part number- 9-210



====Craftsman 101.21400 6x18 Belt Driven Metalworking Lathe====
* Headstock front: Atlas p/n- M6-81B
* Headstock rear: Atlas p/n- M6-82B

====Craftsman 103.21600 8x24 Belt Driven Woodworking Lathe====
* Original Bearings:  ?   Possibly Nice 605 V found with the machine
* Accurate Replacement:  Nice 605 V  or (what I found) GBC 4457-00 
* 2 Original Bronze Sleeve Bearings: 5/8" I.D. x 7/8" O.D. x 1.25" Wide   
* Replacements: Oilite Bronze from Reliable Bronze part # AA-832-4    5/8" I.D. (.627) x 7/8" O.D. ( .878)  x 1.25" Wide

====Craftsman 113.228000, 103.23880, 113.23881 12x37 tube style bed====
* Qty=2 ball bearings
* 6203 with special 3/4" bore
* Emerson part number: 18229
* Sears replacement part number: 816868


==Motor - 1/3 HP==
S-4390 Companion: original-ND USA ENDEE 8013, Accurate replacement-87013

S-4393 Companion: original-ND USA ENDEE 8013; Accurate replacement-87013

S-4396 Companion: original-ND USA ENDEE 8013; Accurate replacement-87013

115.5454 Companion: original-ND (USA) 8013; Accurate replacement-87013

115.5652 Dunlap: original-ND USA ENDEE 8013; Accurate replacement-87013

115.6759 Dunlap: original-ND USA ENDEE 8013; Packard p/n-908013; Accurate replacement-87013

115.6960 Dunlap: original-ND USA 8013; Packard p/n-90813; Accurate replacement-87013

115.6961 Craftsman: original-ND USA 8502; Packard p/n-908502; Accurate replacement-87502

115.7269 Dunlap: original-(TBD, possibly ND USA 8502)

115.7448 Dunlap: original-ND USA 8502; Packard p/n-908502; Accruate replacement-87502

115.19750 Craftsman: original-ND (USA) 77502-16 16mm bore double shield; Accurate replacement-6202-16



==Motor - 1/2 HP==
115.5228 Craftsman: original-(TBD, possibly ND 8502)

115.5559 Craftsman: original-(TBD, possibly ND 8502)

315.5608 Craftsman: original-SKF (USA) 6202Z; Accurate replacement-6202

115.5829 Craftsman: original-ND (USA) 8502; Packard p/n-908502; Accurate replacement-87502

115.6887 Craftsman: original-(TBD, possibly ND 8502)

115.6890 Craftsman: original-ND (USA) 8505; Packard p/n-908505; Accurate replacement-87505

115.6962 Craftsman: original-ND (USA) 8502; Packard p/n-908502; Accurate replacement-87502

115.6963 Craftsman: original-ND (USA) 8502; Packard p/n-908502; Accurate replacement-87502

115.7429 Craftsman: Packard p/n-908502; Accurate replacement-87502
*(double check yours-one motor reported to have 6202-5/8)

115.7556 Craftsman: original-ND (USA) 8502; Packard p/n-908502; Accurate replacement-87502

113.12180 Craftsman: original-Nachi 620310Z, 6203 with 5/8" bore,double shield; Emerson p/n-37161
*Accurate replacement-6203-5/8; Sears replacement p/n-STD315238

410.12500 Craftsman: Brown-Brockmeyer part number- B-5193-BB-203

115.19780 Craftsman: original-ND (USA) 77502-16 16mm bore double shield; Accurate replacement-6202-16

115.19800 Craftsman: Packard p/n-908502

115.19801 Craftsman: original-MRC-202-SFF-4 (USA) 16mm bore double shield; Accurate replacement-6202-16

115.19820 Craftsman: original-ND (USA) 77503 double shield; Accurate replacement-6203

397.19821 Craftsman: original-ND (USA)77503 double shield; Accurate replacement-6203



==Motor - 3/4 HP==
315.5611 Craftsman: original-(TBD, possibly 6204-¾)

115.6891 Craftsman: original-ND (USA) 8505; Accurate replacement-87505

115.7149 Craftsman: original-ND (USA) 8503; Accurate replacement-87503

115.7534 Craftsman: original-ND (USA) 8503; Accurate replacement-87503

410.12510 Craftsman: Brown-Brockmeyer part number- B-5193-BB-203

115.19020 Craftsman:
{BR}- Fan end:  original-ND (USA) 3203 double shield; Accurate replacement-6203
{BR}- Klixon end:  original-ND (USA) 8503 shield inner/open outer; Accurate replacement-87503

113.19052 Craftsman: original-Norma (USA) 203PP double shield; Accurate replacement-6203

115.19810 Craftsman: original-ND (USA) 77502-16 double shield; Accurate replacement-6202-16mm

115.19920 Craftsman: original-ND (USA) 77503 double shield; Accruate replacement-6203

==Motor - 1 HP==
315.5605 Craftsman-Companion: original-SKF 465966Z (single shield); Accurate replacement-6204-¾

115.6892 Craftsman: original-ND (USA) 8505; Packard p/n 908505; Accurate replacement-87505

115.7712 Craftsman: Packard p/n front-908503; Packard p/n rear-954298

113.12200 Craftsman: original-(various) 6203 with 5/8" bore,double shield; Accurate replacement-6203-5/8

410.12520 Craftsman: Brown-Brockmeyer part number- B-5193-BB-205

113.19040 Craftsman: original-Norma (USA) 203PP double shield; Accurate replacement-6203

113.19060 Craftsman: original-Norma (USA) 204PP double shield; Emerson p/n 24237
*Accurate replacement-6204; Sears replacement p/n-STD315245

113.19063 Craftsman: original-ND (USA) 77503 (double shield); Emerson p/n 24313
*Accurate replacement-6203; Sears replacement p/n-STD315235

113.19092 Craftsman: original-Hoover (USA) 77203 double shield; Emerson p/n-24313
*Accurate replacement-6203; Sears replacement p/n-STD315235

551.1939-1 Craftsman:
{BR}-Shaft end: original-Fafnir (USA) 204KDD_C2 double shield; Accurate replacement-6204
{BR}-Brush end: original-Hoover (USA) 7720-17M double shield; 6202-17mm, non-standard size, find new old stock


==Motor - 1½ HP==
113.12211 Craftsman: Hoover 77203 (6203-5/8 double shield)

410.12530 Craftsman: Brown-Brockmeyer p/n- B-5193-BB-205 (Qty=2)

551.1933-1 Craftsman:
{BR}-Shaft end: original-Fafnir (USA) 204KDD_C2 double shield; Accurate replacement-6204
{BR}-Brush end: original-SKF (6202-17mm) with removeable shield; non-standard size, find new old stock



==Motor - 2 HP==
410.12540 Craftsman: Brown-Brockmeyer p/n front(shaft)- B-5193-BB-206; rear- B-5193-BB-205


==Motor - 3 HP==
410.12550 Craftsman: Brown-Brockmeyer p/n front(shaft)- B-5193-BB-206 (6206 double shield C3-clearance); rear- B-5193-BB-205 (6206 double shield C3-clearance)



==Motor - 5 HP==
410.12560 Craftsman: Brown-Brockmeyer p/n front(shaft)- B-5193-BB-308; rear- B-5193-BB-206


==Motor - 7½ HP==
410.12570 Craftsman: Brown-Brockmeyer p/n front(shaft)- B-5193-BB-308; rear- B-5193-BB-206


==Planer==
====Craftsman 103.1801 6"x2" manual feed====
* Central Specialty part number: X-1705
* Original Bearings:  Hoover 7202-10 (-10 denotes 5/8" bore)
* Accurate replacement:  6202ZZ-5/8 (double shields) or 6202LL-5/8 (double seals)

====Craftsman 103.23700 6"x2" manual feed====
* Central Specialty part number: 18211
* Original Bearings:  ''(TBD)''
* Accurate replacement:  6202ZZ-5/8 (double shields) or 6202LL-5/8 (double seals)
* Sears replacement: 508511 (assembly-arbor & 2 ball bearings)

==ROUTER==
*Craftsman 315.25031: upper-Hoover WCB7500RS, lower-Hoover D7202 (seal-outer, shield inner)


==SANDER==
====Craftsman 103.22500 Belt/Disk====
* Drive drum-original bearings: Norma XF184KK metal & phenolic seal, Qty=2
* Drive drum-Accurate replacement: 6202LL-5/8 (double seals), Qty=2
* Idler drum-Central Specialty part number: 47611, water pump style bearing with integral shaft, Qty=1
* Idler drum-replacement bearing: (TBD)

==Shaper==
====Dunlap 534.09760====
* Qty=2 ball bearings
* Original Atlas/Power-King part number: 50-18FF
* Accurate replacement: 6202-5/8 (double shield) possibly tighter than C3 clearance


====Craftsman 113.239420==== 
* Qty=2 ball bearings
* Spindle Bearings: NSK 6202-625 (5/8",35mm, 11mm) double shields


====Craftsman 103.23940, 113.23940==== 
* Qty=2 ball bearings
* Original Bearings: 6202 (double shields)
* Accurate Replacement: 6202 (double shields)
* Central Specialty/Emerson part number: 39815
* Possibly a tighter than C3 clearance ball bearing



==Swing Saw==
====Craftsman 103.25450====
* Original Bearings (Qty-2): MRC 204 (removeable double seals, can be flushed and repacked)
* Accurate Replacement:  6204 (double seals)


==Table Saw==
====Craftsman/Atlas 8-inch Tilt-Arbor====
* 6202 with 5/8-inch bore

====Craftsman 103.0213 & Dunlap 103.02041 8-inch Tilt-Table Bench Saw====
* Central Specialty part number: X-1705
* Accurate Replacement: 6202ZZ-5/8 (double shields) or 6202LL-5/8 (double seals)

====Dunlap 103.0214 8-inch Tilt-Table Bench Saw====
* Central Specialty part number: X-822 (Oilite OD=3/4", ID=9/16", L=1-3/16")


====Craftsman 103.2000 9-inch Bench Saw====
* Central Specialty part number: 53190 (water pump style bearing with key)

====Craftsman 113.1011, 113.22400, 113.29730 8-inch Bench Saw====
* Accurate Replacement: 6202ZZ-5/8 (double shields) or 6202LL-5/8 (double seals)
* Sears Parts Replacement: 3509


====Craftsman 103.2727_ & 113.2245_ 10-inch Floor Saws====
* Accurate Replacement: 6203ZZ (double shields) or 6203LL (double seals)
* Sears Parts Replacement: 38818


====Craftsman 113.2752_ 10-inch Bench Saw====
* Orignal Bearings: Norma XF121PP double shield
* Accurate Replacement: 6202ZZ-5/8 (double shields) or 6202LL-5/8 (double seals)
* Sears Parts Replacement: 3509

====Craftsman 113.2999_ 10-inch Bench Saw====
* Original Bearings: Hoover 77202-10 (-10 denotes 5/8" bore)
* Accurate Replacement: 6202ZZ-5/8 (double shields) or 6202LL-5/8 (double seals)
* Sears Parts Replacement: 3509

==Bearing Quick Reference Specs==
Brg#: Bore / OD / Width / Extended Race{BR}
{BR}1622: .5625" (9/16") / 1.375" (1⅜") / .4375" (7/16") / -
{BR}6202: 15mm / 35mm / 11mm / -
{BR}6203: 17mm / 40mm / 12mm / -
{BR}6204: 20mm / 47mm / 14mm / -
{BR}8013: 13mm / 32mm / 10mm / +3mm one side
{BR}R8ZZ: .5000” (½") / 1.1250” (1⅛") / .3125” (5/16") / -
Meta Keywords:
Meta Description:
Change Comment:
	Welcome Guest, • Login
Wiki Home \| VintageMachinery.org Home \| OWWM.org Home \| Donate	Search the Wiki: »